Caps dump for model 125
Model name:	MARK-V Field FT-1000MP
Mfg name:	Yaesu
Backend version:	0.0.5
Backend copyright:	LGPL
Backend status:	Alpha
Rig type:	Transceiver
PTT type:	rig capable
DCD type:	rig capable
Port type:	RS-232
Serial speed: 4800..4800 bauds, 8N2 
Write delay 50ms, timeout 2000ms, 0 retry
Post Write delay 5ms
Has targetable VFO: yes
Has transceive: no
Announce: 0x0
Max RIT: -9.999kHz/+9.999kHz
Max XIT: -9.999kHz/+9.999kHz
Max IF-SHIFT: -1.120kHz/+1.120kHz
Preamp: none
Attenuator: none
CTCSS: 67.0 71.9 77.0 82.5 88.5 94.8 100.0 103.5 107.2 110.9 114.8 118.8 123.0 127.3 131.8 136.5 141.3 146.2 151.4 156.7 159.8 162.2 167.9 173.8 179.9 186.2 192.8 203.5 210.7 218.1 225.7 233.6 241.8 250.3 Hz, 34 tones
DCS: none
Get functions: FAGC NB COMP VOX TONE TSQL SBKIN FBKIN LOCK 
Set functions: FAGC NB COMP VOX TONE TSQL SBKIN FBKIN LOCK 
Get level: CWPITCH(0..0/0) RFPOWER(0..0/0) MICGAIN(0..0/0) COMP(0..0/0) RAWSTR(0..0/0) SWR(0..0/0) ALC(0..0/0) 
Set level: 
Extra levels:
Get parameters: 
Set parameters: 
Extra parameters:
VFO list: VFOA VFOB 
VFO Ops: CPY FROM_VFO TO_VFO UP DOWN 
Scan Ops: 
Number of banks:	0
Memory name desc size:	0
Memories:
	1..99:   	MEM
	  mem caps: ANT FREQ MODE WIDTH RPTRSHIFT RIT XIT FLAG 
	100..108:   	EDGE
	  mem caps: 
	109..113:   	MEMOPAD
	  mem caps: 
TX ranges status, region 1:	OK (0)
RX ranges status, region 1:	OK (0)
TX ranges status, region 2:	OK (0)
RX ranges status, region 2:	OK (0)
Tuning steps:
	10 Hz:   	CW USB LSB RTTY 
	100 Hz:   	CW USB LSB RTTY 
	100 Hz:   	AM 
	1 kHz:   	AM 
	100 Hz:   	FM 
	1 kHz:   	FM 
Tuning steps status:	OK (0)
Filters:
	2.4 kHz:   	AM CW USB LSB RTTY 
	2 kHz:   	CW USB LSB RTTY 
	500 Hz:   	CW RTTY 
	250 Hz:   	CW RTTY 
	5 kHz:   	AM 
	8 kHz:   	FM 
Bandwidths:
	AM	normal: 2.4 kHz,	narrow: 0 Hz,	wide: 5 kHz
	CW	normal: 2.4 kHz,	narrow: 2 kHz,	wide: 0 Hz
	USB	normal: 2.4 kHz,	narrow: 2 kHz,	wide: 0 Hz
	LSB	normal: 2.4 kHz,	narrow: 2 kHz,	wide: 0 Hz
	RTTY	normal: 2.4 kHz,	narrow: 2 kHz,	wide: 0 Hz
	FM	normal: 8 kHz,	narrow: 0 Hz,	wide: 0 Hz
Has priv data:	N
Has init:	Y
Has cleanup:	Y
Has open:	Y
Has close:	N
Can set conf:	N
Can get conf:	N
Can set frequency:	Y
Can get frequency:	Y
Can set mode:	Y
Can get mode:	Y
Can set vfo:	Y
Can get vfo:	Y
Can set ptt:	Y
Can get ptt:	N
Can get dcd:	N
Can set repeater duplex:	N
Can get repeater duplex:	N
Can set repeater offset:	N
Can get repeater offset:	N
Can set split freq:	E
Can get split freq:	E
Can set split mode:	E
Can get split mode:	E
Can set split vfo:	N
Can get split vfo:	N
Can set tuning step:	N
Can get tuning step:	N
Can set RIT:	Y
Can get RIT:	Y
Can set XIT:	Y
Can get XIT:	Y
Can set CTCSS:	N
Can get CTCSS:	N
Can set DCS:	N
Can get DCS:	N
Can set CTCSS squelch:	N
Can get CTCSS squelch:	N
Can set DCS squelch:	N
Can get DCS squelch:	N
Can set power stat:	N
Can get power stat:	N
Can reset:	N
Can get ant:	N
Can set ant:	N
Can set transceive:	N
Can get transceive:	N
Can set func:	N
Can get func:	N
Can set level:	N
Can get level:	Y
Can set param:	N
Can get param:	N
Can send DTMF:	N
Can recv DTMF:	N
Can send Morse:	N
Can decode events:	N
Can set bank:	N
Can set mem:	N
Can get mem:	N
Can set channel:	N
Can get channel:	N
Can ctl mem/vfo:	N
Can scan:	N
Can get info:	N

Overall backend warnings: 0