Caps dump for model 1603
Model name:	RX-320
Mfg name:	Ten-Tec
Backend version:	0.6
Backend copyright:	LGPL
Backend status:	Stable
Rig type:	PC Receiver
PTT type:	None
DCD type:	None
Port type:	RS-232
Serial speed: 1200..1200 bauds, 8N1 
Write delay 0ms, timeout 200ms, 3 retry
Post Write delay 0ms
Has targetable VFO: no
Has transceive: no
Announce: 0x0
Max RIT: -0.0kHz/+0.0kHz
Max XIT: -0.0kHz/+0.0kHz
Max IF-SHIFT: -2.0kHz/+2.0kHz
Preamp: none
Attenuator: none
CTCSS: none
DCS: none
Get functions: 
Set functions: 
Get level: AF(0..1/0.015625) IF(-2000..2000/10) CWPITCH(0..2000/100) AGC(0..0/0) RAWSTR(0..10000/0) 
Set level: AF(0..1/0.015625) IF(-2000..2000/10) CWPITCH(0..2000/100) AGC(0..0/0) 
Extra levels:
Get parameters: 
Set parameters: 
Extra parameters:
VFO list: VFOA 
VFO Ops: 
Scan Ops: 
Number of banks:	0
Memory name desc size:	0
Memories: none
TX ranges status, region 1:	OK (0)
RX ranges status, region 1:	OK (0)
TX ranges status, region 2:	OK (0)
RX ranges status, region 2:	OK (0)
Tuning steps:
	10 Hz:   	AM CW USB LSB 
Tuning steps status:	OK (0)
Filters:
	300 Hz:   	CW 
	450 Hz:   	CW 
	600 Hz:   	CW 
	750 Hz:   	CW 
	900 Hz:   	CW 
	1.2 kHz:   	CW 
	1.5 kHz:   	CW USB LSB 
	1.8 kHz:   	CW USB LSB 
	2.1 kHz:   	CW USB LSB 
	2.4 kHz:   	AM CW USB LSB 
	3 kHz:   	AM CW USB LSB 
	4.2 kHz:   	AM CW USB LSB 
	5.1 kHz:   	AM CW USB LSB 
	6 kHz:   	AM CW USB LSB 
	8 kHz:   	AM CW USB LSB 
Bandwidths:
	AM	normal: 2.4 kHz,	narrow: 0 Hz,	wide: 3 kHz
	CW	normal: 300 Hz,	narrow: 0 Hz,	wide: 450 Hz
	USB	normal: 1.5 kHz,	narrow: 0 Hz,	wide: 1.8 kHz
	LSB	normal: 1.5 kHz,	narrow: 0 Hz,	wide: 1.8 kHz
Has priv data:	N
Has init:	Y
Has cleanup:	Y
Has open:	N
Has close:	N
Can set conf:	N
Can get conf:	N
Can set frequency:	Y
Can get frequency:	Y
Can set mode:	Y
Can get mode:	Y
Can set vfo:	N
Can get vfo:	N
Can set ptt:	N
Can get ptt:	N
Can get dcd:	N
Can set repeater duplex:	N
Can get repeater duplex:	N
Can set repeater offset:	N
Can get repeater offset:	N
Can set split freq:	N
Can get split freq:	N
Can set split mode:	N
Can get split mode:	N
Can set split vfo:	N
Can get split vfo:	N
Can set tuning step:	N
Can get tuning step:	N
Can set RIT:	N
Can get RIT:	N
Can set XIT:	N
Can get XIT:	N
Can set CTCSS:	N
Can get CTCSS:	N
Can set DCS:	N
Can get DCS:	N
Can set CTCSS squelch:	N
Can get CTCSS squelch:	N
Can set DCS squelch:	N
Can get DCS squelch:	N
Can set power stat:	N
Can get power stat:	N
Can reset:	N
Can get ant:	N
Can set ant:	N
Can set transceive:	N
Can get transceive:	N
Can set func:	N
Can get func:	N
Can set level:	Y
Can get level:	Y
Can set param:	N
Can get param:	N
Can send DTMF:	N
Can recv DTMF:	N
Can send Morse:	N
Can decode events:	N
Can set bank:	N
Can set mem:	N
Can get mem:	N
Can set channel:	N
Can get channel:	N
Can ctl mem/vfo:	N
Can scan:	N
Can get info:	Y

Overall backend warnings: 0