Caps dump for model 207
Model name:	TS-790
Mfg name:	Kenwood
Backend version:	0.7.2
Backend copyright:	LGPL
Backend status:	Alpha
Rig type:	Transceiver
PTT type:	rig capable
DCD type:	rig capable
Port type:	RS-232
Serial speed: 4800..4800 bauds, 8N2 CTS/RTS
Write delay 0ms, timeout 1000ms, 3 retry
Post Write delay 0ms
Has targetable VFO: yes
Has transceive: yes
Announce: 0x0
Max RIT: -9.900kHz/+9.900kHz
Max XIT: -0.0kHz/+0.0kHz
Max IF-SHIFT: -0.0kHz/+0.0kHz
Preamp: none
Attenuator: none
CTCSS: 67.0 71.9 74.4 77.0 79.7 82.5 85.4 88.5 91.5 94.8 97.4 100.0 103.5 107.2 110.9 114.8 118.8 123.0 127.3 131.8 136.5 141.3 146.2 151.4 156.7 162.2 167.9 173.8 179.9 186.2 192.8 203.5 210.7 218.1 225.7 233.6 241.8 250.3 Hz, 38 tones
DCS: none
Get functions: TSQL LOCK MUTE 
Set functions: TSQL LOCK MUTE 
Get level: STRENGTH(0..0/0) 
Set level: 
Extra levels:
Get parameters: 
Set parameters: 
Extra parameters:
VFO list: VFOA VFOB 
VFO Ops: UP DOWN 
Scan Ops: VFO 
Number of banks:	0
Memory name desc size:	0
Memories:
	1..59:   	MEM
	  mem caps: FREQ MODE TXFREQ TXMODE SPLIT TONE FLAG 
TX ranges status, region 1:	OK (0)
RX ranges status, region 1:	OK (0)
TX ranges status, region 2:	OK (0)
RX ranges status, region 2:	OK (0)
Tuning steps:
	50 Hz:   	CW USB LSB FM CWR 
	100 Hz:   	CW USB LSB FM CWR 
	1 kHz:   	CW USB LSB FM CWR 
	5 kHz:   	CW USB LSB FM CWR 
	9 kHz:   	CW USB LSB FM CWR 
	10 kHz:   	CW USB LSB FM CWR 
	12.5 kHz:   	CW USB LSB FM CWR 
	20 kHz:   	CW USB LSB FM CWR 
	25 kHz:   	CW USB LSB FM CWR 
	100 kHz:   	CW USB LSB FM CWR 
	1 MHz:   	CW USB LSB FM CWR 
	ANY:   	CW USB LSB FM CWR 
Tuning steps status:	OK (0)
Filters:
	2.1 kHz:   	CW USB LSB CWR 
	500 Hz:   	CW CWR 
	12 kHz:   	FM 
Bandwidths:
	CW	normal: 2.1 kHz,	narrow: 500 Hz,	wide: 0 Hz
	USB	normal: 2.1 kHz,	narrow: 0 Hz,	wide: 0 Hz
	LSB	normal: 2.1 kHz,	narrow: 0 Hz,	wide: 0 Hz
	FM	normal: 12 kHz,	narrow: 0 Hz,	wide: 0 Hz
	CWR	normal: 2.1 kHz,	narrow: 500 Hz,	wide: 0 Hz
Has priv data:	Y
Has init:	Y
Has cleanup:	Y
Has open:	N
Has close:	N
Can set conf:	N
Can get conf:	N
Can set frequency:	Y
Can get frequency:	Y
Can set mode:	Y
Can get mode:	Y
Can set vfo:	Y
Can get vfo:	Y
Can set ptt:	Y
Can get ptt:	Y
Can get dcd:	Y
Can set repeater duplex:	N
Can get repeater duplex:	N
Can set repeater offset:	N
Can get repeater offset:	N
Can set split freq:	E
Can get split freq:	E
Can set split mode:	E
Can get split mode:	E
Can set split vfo:	Y
Can get split vfo:	Y
Can set tuning step:	N
Can get tuning step:	N
Can set RIT:	Y
Can get RIT:	Y
Can set XIT:	N
Can get XIT:	N
Can set CTCSS:	Y
Can get CTCSS:	Y
Can set DCS:	N
Can get DCS:	N
Can set CTCSS squelch:	N
Can get CTCSS squelch:	N
Can set DCS squelch:	N
Can get DCS squelch:	N
Can set power stat:	N
Can get power stat:	N
Can reset:	N
Can get ant:	N
Can set ant:	N
Can set transceive:	Y
Can get transceive:	Y
Can set func:	Y
Can get func:	Y
Can set level:	Y
Can get level:	Y
Can set param:	N
Can get param:	N
Can send DTMF:	N
Can recv DTMF:	N
Can send Morse:	N
Can decode events:	N
Can set bank:	N
Can set mem:	Y
Can get mem:	Y
Can set channel:	Y
Can get channel:	Y
Can ctl mem/vfo:	Y
Can scan:	Y
Can get info:	Y

Overall backend warnings: 0