Caps dump for model 221
Model name:	K2
Mfg name:	Elecraft
Backend version:	0.7
Backend copyright:	LGPL
Backend status:	Beta
Rig type:	Transceiver
PTT type:	rig capable
DCD type:	rig capable
Port type:	RS-232
Serial speed: 4800..4800 bauds, 8N2 
Write delay 0ms, timeout 600ms, 3 retry
Post Write delay 0ms
Has targetable VFO: yes
Has transceive: yes
Announce: 0x0
Max RIT: -9.990kHz/+9.990kHz
Max XIT: -9.990kHz/+9.990kHz
Max IF-SHIFT: -0.0kHz/+0.0kHz
Preamp: 14dB
Attenuator: 10dB
CTCSS: none
DCS: none
Get functions: NB LOCK 
Set functions: NB LOCK 
Get level: PREAMP(0..0/0) ATT(0..0/0) SQL(0..0/0) RFPOWER(0..0/0) KEYSPD(0..0/0) AGC(0..0/0) STRENGTH(0..0/0) 
Set level: PREAMP(0..0/0) ATT(0..0/0) SQL(0..0/0) RFPOWER(0..0/0) KEYSPD(0..0/0) AGC(0..0/0) 
Extra levels:
Get parameters: 
Set parameters: 
Extra parameters:
VFO list: VFOA VFOB 
VFO Ops: UP DOWN 
Scan Ops: 
Number of banks:	0
Memory name desc size:	0
Memories: none
TX ranges status, region 1:	OK (0)
RX ranges status, region 1:	OK (0)
TX ranges status, region 2:	OK (0)
RX ranges status, region 2:	OK (0)
Tuning steps:
	10 Hz:   	CW USB LSB RTTY CWR RTTYR 
Tuning steps status:	OK (0)
Filters:
	2.5 kHz:   	USB LSB 
	500 Hz:   	CW CWR 
	500 Hz:   	RTTY RTTYR 
Bandwidths:
	CW	normal: 500 Hz,	narrow: 0 Hz,	wide: 0 Hz
	USB	normal: 2.5 kHz,	narrow: 0 Hz,	wide: 0 Hz
	LSB	normal: 2.5 kHz,	narrow: 0 Hz,	wide: 0 Hz
	RTTY	normal: 500 Hz,	narrow: 0 Hz,	wide: 0 Hz
	CWR	normal: 500 Hz,	narrow: 0 Hz,	wide: 0 Hz
	RTTYR	normal: 500 Hz,	narrow: 0 Hz,	wide: 0 Hz
Has priv data:	Y
Has init:	Y
Has cleanup:	Y
Has open:	N
Has close:	N
Can set conf:	N
Can get conf:	N
Can set frequency:	Y
Can get frequency:	Y
Can set mode:	Y
Can get mode:	Y
Can set vfo:	Y
Can get vfo:	Y
Can set ptt:	Y
Can get ptt:	Y
Can get dcd:	Y
Can set repeater duplex:	N
Can get repeater duplex:	N
Can set repeater offset:	N
Can get repeater offset:	N
Can set split freq:	E
Can get split freq:	E
Can set split mode:	E
Can get split mode:	E
Can set split vfo:	Y
Can get split vfo:	Y
Can set tuning step:	N
Can get tuning step:	N
Can set RIT:	Y
Can get RIT:	Y
Can set XIT:	Y
Can get XIT:	Y
Can set CTCSS:	N
Can get CTCSS:	N
Can set DCS:	N
Can get DCS:	N
Can set CTCSS squelch:	N
Can get CTCSS squelch:	N
Can set DCS squelch:	N
Can get DCS squelch:	N
Can set power stat:	N
Can get power stat:	Y
Can reset:	N
Can get ant:	Y
Can set ant:	Y
Can set transceive:	Y
Can get transceive:	Y
Can set func:	Y
Can get func:	Y
Can set level:	Y
Can get level:	Y
Can set param:	N
Can get param:	N
Can send DTMF:	N
Can recv DTMF:	N
Can send Morse:	Y
Can decode events:	N
Can set bank:	N
Can set mem:	N
Can get mem:	N
Can set channel:	N
Can get channel:	N
Can ctl mem/vfo:	Y
Can scan:	N
Can get info:	N

Overall backend warnings: 0