Caps dump for model 227
Model name:	TM-V7
Mfg name:	Kenwood
Backend version:	0.3
Backend copyright:	LGPL
Backend status:	Beta
Rig type:	Mobile
PTT type:	rig capable
DCD type:	rig capable
Port type:	RS-232
Serial speed: 9600..9600 bauds, 8N1 
Write delay 1ms, timeout 500ms, 3 retry
Post Write delay 0ms
Has targetable VFO: no
Has transceive: yes
Announce: 0x0
Max RIT: -0.0kHz/+0.0kHz
Max XIT: -0.0kHz/+0.0kHz
Max IF-SHIFT: -0.0kHz/+0.0kHz
Preamp: none
Attenuator: none
CTCSS: 67.0 71.9 74.4 77.0 79.7 82.5 85.4 88.5 91.5 94.8 97.4 100.0 103.5 107.2 110.9 114.8 118.8 123.0 127.3 131.8 136.5 141.3 146.2 151.4 156.7 162.2 167.9 173.8 179.9 186.2 192.8 203.5 210.7 218.1 225.7 233.6 241.8 250.3 Hz, 38 tones
DCS: none
Get functions: 
Set functions: TBURST 
Get level: AF(0..4.48416e-44/0) SQL(0..4.48416e-44/0) RFPOWER(0..2.8026e-45/0) RAWSTR(0..7/0) 
Set level: AF(0..4.48416e-44/0) SQL(0..4.48416e-44/0) RFPOWER(0..2.8026e-45/0) 
Extra levels:
Get parameters: 
Set parameters: 
Extra parameters:
VFO list: VFOA VFOB 
VFO Ops: TO_VFO UP DOWN 
Scan Ops: 
Number of banks:	0
Memory name desc size:	6
Memories:
	1..90:   	MEM
	  mem caps: FREQ MODE TXFREQ RPTRSHIFT TS TONE CTCSS NAME 
	101..190:   	MEM
	  mem caps: FREQ MODE TXFREQ RPTRSHIFT TS TONE CTCSS NAME 
	201..206:   	EDGE
	  mem caps: FREQ MODE TXFREQ RPTRSHIFT TS TONE CTCSS NAME 
	211..216:   	EDGE
	  mem caps: FREQ MODE TXFREQ RPTRSHIFT TS TONE CTCSS NAME 
	221..222:   	CALL
	  mem caps: FREQ MODE TXFREQ RPTRSHIFT TS TONE CTCSS NAME 
TX ranges status, region 1:	OK (0)
RX ranges status, region 1:	OK (0)
TX ranges status, region 2:	OK (0)
RX ranges status, region 2:	OK (0)
Tuning steps:
	5 kHz:   	FM 
	6.25 kHz:   	FM 
	10 kHz:   	FM 
	12.5 kHz:   	FM 
	15 kHz:   	FM 
	25 kHz:   	FM 
	50 kHz:   	FM 
Tuning steps status:	OK (0)
Filters: none! This backend might be bogus!
Bandwidths:
Has priv data:	Y
Has init:	Y
Has cleanup:	Y
Has open:	Y
Has close:	N
Can set conf:	N
Can get conf:	N
Can set frequency:	Y
Can get frequency:	Y
Can set mode:	N
Can get mode:	Y
Can set vfo:	Y
Can get vfo:	Y
Can set ptt:	Y
Can get ptt:	N
Can get dcd:	Y
Can set repeater duplex:	N
Can get repeater duplex:	N
Can set repeater offset:	N
Can get repeater offset:	N
Can set split freq:	E
Can get split freq:	E
Can set split mode:	N
Can get split mode:	E
Can set split vfo:	N
Can get split vfo:	N
Can set tuning step:	N
Can get tuning step:	N
Can set RIT:	N
Can get RIT:	N
Can set XIT:	N
Can get XIT:	N
Can set CTCSS:	N
Can get CTCSS:	N
Can set DCS:	N
Can get DCS:	N
Can set CTCSS squelch:	N
Can get CTCSS squelch:	N
Can set DCS squelch:	N
Can get DCS squelch:	N
Can set power stat:	N
Can get power stat:	Y
Can reset:	N
Can get ant:	N
Can set ant:	N
Can set transceive:	Y
Can get transceive:	Y
Can set func:	Y
Can get func:	Y
Can set level:	Y
Can get level:	Y
Can set param:	N
Can get param:	N
Can send DTMF:	N
Can recv DTMF:	N
Can send Morse:	N
Can decode events:	Y
Can set bank:	N
Can set mem:	Y
Can get mem:	Y
Can set channel:	Y
Can get channel:	Y
Can ctl mem/vfo:	Y
Can scan:	N
Can get info:	Y

Overall backend warnings: 1