Caps dump for model 356
Model name:	IC-7800
Mfg name:	Icom
Backend version:	0.5.1
Backend copyright:	LGPL
Backend status:	Untested
Rig type:	Transceiver
PTT type:	rig capable
DCD type:	rig capable
Port type:	RS-232
Serial speed: 300..19200 bauds, 8N1 
Write delay 0ms, timeout 200ms, 3 retry
Post Write delay 0ms
Has targetable VFO: no
Has transceive: yes
Announce: 0x0
Max RIT: -9.999kHz/+9.999kHz
Max XIT: -9.999kHz/+9.999kHz
Max IF-SHIFT: -0.0kHz/+0.0kHz
Preamp: 10dB 20dB
Attenuator: 3dB 6dB 9dB 12dB 15dB 18dB 21dB
CTCSS: 67.0 69.3 71.9 74.4 77.0 79.7 82.5 85.4 88.5 91.5 94.8 97.4 100.0 103.5 107.2 110.9 114.8 118.8 123.0 127.3 131.8 136.5 141.3 146.2 151.4 156.7 159.8 162.2 165.5 167.9 171.3 173.8 177.3 179.9 183.5 186.2 189.9 192.8 196.6 199.5 203.5 206.5 210.7 218.1 225.7 229.1 233.6 241.8 250.3 254.1 Hz, 50 tones
DCS: none
Get functions: FAGC NB COMP VOX TONE TSQL SBKIN FBKIN ANF NR MON MN LOCK VSC 
Set functions: FAGC NB COMP VOX TONE TSQL SBKIN FBKIN ANF NR MON MN LOCK VSC 
Get level: PREAMP(0..0/0) ATT(0..0/0) VOX(0..0/0) AF(0..0/0) RF(0..0/0) SQL(0..0/0) APF(0..0/0) NR(0..0/0) PBT_IN(0..0/0) PBT_OUT(0..0/0) CWPITCH(0..0/0) RFPOWER(0..0/0) MICGAIN(0..0/0) KEYSPD(0..0/0) NOTCHF(0..0/0) COMP(0..0/0) AGC(0..0/0) BKINDL(0..0/0) BAL(0..0/0) VOXGAIN(0..0/0) RAWSTR(0..255/0) SWR(0..0/0) ALC(0..0/0) 
Set level: PREAMP(0..0/0) ATT(0..0/0) VOX(0..0/0) AF(0..0/0) RF(0..0/0) SQL(0..0/0) APF(0..0/0) NR(0..0/0) PBT_IN(0..0/0) PBT_OUT(0..0/0) CWPITCH(0..0/0) RFPOWER(0..0/0) MICGAIN(0..0/0) KEYSPD(0..0/0) NOTCHF(0..0/0) COMP(0..0/0) AGC(0..0/0) BKINDL(0..0/0) BAL(0..0/0) VOXGAIN(0..0/0) 
Extra levels:
Get parameters: ANN(0..0/0) BACKLIGHT(0..0/0) 
Set parameters: ANN(0..0/0) BACKLIGHT(0..0/0) 
Extra parameters:
VFO list: MEM VFOA VFOB 
VFO Ops: CPY XCHG FROM_VFO TO_VFO MCL TUNE 
Scan Ops: MEM PRIO PROG DELTA VFO 
Number of banks:	0
Memory name desc size:	0
Memories:
	1..99:   	MEM
	  mem caps: 
	100..101:   	EDGE
	  mem caps: 
TX ranges status, region 1:	OK (0)
RX ranges status, region 1:	OK (0)
TX ranges status, region 2:	OK (0)
RX ranges status, region 2:	OK (0)
Tuning steps:
	1 Hz:   	AM CW USB LSB RTTY FM CWR RTTYR 
	100 Hz:   	AM CW USB LSB RTTY FM CWR RTTYR 
	1 kHz:   	AM CW USB LSB RTTY FM CWR RTTYR 
	5 kHz:   	AM CW USB LSB RTTY FM CWR RTTYR 
	9 kHz:   	AM CW USB LSB RTTY FM CWR RTTYR 
	10 kHz:   	AM CW USB LSB RTTY FM CWR RTTYR 
	12.5 kHz:   	AM CW USB LSB RTTY FM CWR RTTYR 
	20 kHz:   	AM CW USB LSB RTTY FM CWR RTTYR 
	25 kHz:   	AM CW USB LSB RTTY FM CWR RTTYR 
Tuning steps status:	OK (0)
Filters:
	2.4 kHz:   	USB LSB RTTY RTTYR 
	500 Hz:   	CW CWR 
	6 kHz:   	AM 
	2.4 kHz:   	AM 
	15 kHz:   	FM 
	8 kHz:   	FM 
Bandwidths:
	AM	normal: 6 kHz,	narrow: 2.4 kHz,	wide: 0 Hz
	CW	normal: 500 Hz,	narrow: 0 Hz,	wide: 0 Hz
	USB	normal: 2.4 kHz,	narrow: 0 Hz,	wide: 0 Hz
	LSB	normal: 2.4 kHz,	narrow: 0 Hz,	wide: 0 Hz
	RTTY	normal: 2.4 kHz,	narrow: 0 Hz,	wide: 0 Hz
	FM	normal: 15 kHz,	narrow: 8 kHz,	wide: 0 Hz
	CWR	normal: 500 Hz,	narrow: 0 Hz,	wide: 0 Hz
	RTTYR	normal: 2.4 kHz,	narrow: 0 Hz,	wide: 0 Hz
Has priv data:	Y
Has init:	Y
Has cleanup:	Y
Has open:	N
Has close:	N
Can set conf:	Y
Can get conf:	Y
Can set frequency:	Y
Can get frequency:	Y
Can set mode:	Y
Can get mode:	Y
Can set vfo:	Y
Can get vfo:	N
Can set ptt:	Y
Can get ptt:	Y
Can get dcd:	Y
Can set repeater duplex:	Y
Can get repeater duplex:	Y
Can set repeater offset:	Y
Can get repeater offset:	Y
Can set split freq:	Y
Can get split freq:	Y
Can set split mode:	Y
Can get split mode:	Y
Can set split vfo:	Y
Can get split vfo:	Y
Can set tuning step:	Y
Can get tuning step:	Y
Can set RIT:	Y
Can get RIT:	N
Can set XIT:	N
Can get XIT:	N
Can set CTCSS:	Y
Can get CTCSS:	Y
Can set DCS:	N
Can get DCS:	N
Can set CTCSS squelch:	Y
Can get CTCSS squelch:	Y
Can set DCS squelch:	N
Can get DCS squelch:	N
Can set power stat:	N
Can get power stat:	N
Can reset:	N
Can get ant:	Y
Can set ant:	Y
Can set transceive:	N
Can get transceive:	N
Can set func:	Y
Can get func:	Y
Can set level:	Y
Can get level:	Y
Can set param:	Y
Can get param:	Y
Can send DTMF:	N
Can recv DTMF:	N
Can send Morse:	N
Can decode events:	Y
Can set bank:	N
Can set mem:	Y
Can get mem:	N
Can set channel:	E
Can get channel:	E
Can ctl mem/vfo:	Y
Can scan:	Y
Can get info:	N

Overall backend warnings: 0