Caps dump for model 401
Model name:	IC-PCR1000
Mfg name:	Icom
Backend version:	0.6
Backend copyright:	LGPL
Backend status:	Alpha
Rig type:	PC Receiver
PTT type:	None
DCD type:	rig capable
Port type:	RS-232
Serial speed: 300..38400 bauds, 8N1 
Write delay 12ms, timeout 300ms, 3 retry
Post Write delay 0ms
Has targetable VFO: no
Has transceive: yes
Announce: 0x0
Max RIT: -0.0kHz/+0.0kHz
Max XIT: -0.0kHz/+0.0kHz
Max IF-SHIFT: -1.200kHz/+1.200kHz
Preamp: none
Attenuator: 20dB
CTCSS: 67.0 69.3 71.0 71.9 74.4 77.0 79.7 82.5 85.4 88.5 91.5 94.8 97.4 100.0 103.5 107.2 110.9 114.8 118.8 123.0 127.3 131.8 136.5 141.3 146.2 151.4 156.7 159.8 162.2 165.5 167.9 171.3 173.8 177.3 179.9 183.5 186.2 189.9 192.8 196.6 199.5 203.5 206.5 210.7 218.1 225.7 229.1 233.6 241.8 250.3 254.1 Hz, 51 tones
DCS: none
Get functions: NB TSQL ANF NR AFC 
Set functions: NB TSQL ANF NR AFC 
Get level: ATT(0..0/0) AF(0..0/0) SQL(0..0/0) IF(-1270..1270/10) NR(0..0/0) AGC(0..0/0) RAWSTR(0..255/0) STRENGTH(0..0/0) 
Set level: ATT(0..0/0) AF(0..0/0) SQL(0..0/0) IF(-1270..1270/10) NR(0..0/0) AGC(0..0/0) 
Extra levels:
Get parameters: 
Set parameters: 
Extra parameters:
VFO list: VFOA 
VFO Ops: 
Scan Ops: 
Number of banks:	0
Memory name desc size:	0
Memories: none
TX ranges status, region 1:	OK (0)
RX ranges status, region 1:	OK (0)
TX ranges status, region 2:	OK (0)
RX ranges status, region 2:	OK (0)
Tuning steps:
	1 Hz:   	AM CW USB LSB FM WFM 
Tuning steps status:	OK (0)
Filters:
	15 kHz:   	AM FM 
	6 kHz:   	AM FM 
	2.8 kHz:   	AM CW USB LSB 
	230 kHz:   	WFM 
	50 kHz:   	AM FM WFM 
Bandwidths:
	AM	normal: 15 kHz,	narrow: 6 kHz,	wide: 50 kHz
	CW	normal: 2.8 kHz,	narrow: 0 Hz,	wide: 0 Hz
	USB	normal: 2.8 kHz,	narrow: 0 Hz,	wide: 0 Hz
	LSB	normal: 2.8 kHz,	narrow: 0 Hz,	wide: 0 Hz
	FM	normal: 15 kHz,	narrow: 6 kHz,	wide: 50 kHz
	WFM	normal: 230 kHz,	narrow: 50 kHz,	wide: 0 Hz
Has priv data:	N
Has init:	Y
Has cleanup:	Y
Has open:	Y
Has close:	Y
Can set conf:	N
Can get conf:	N
Can set frequency:	Y
Can get frequency:	Y
Can set mode:	Y
Can get mode:	Y
Can set vfo:	N
Can get vfo:	N
Can set ptt:	N
Can get ptt:	N
Can get dcd:	N
Can set repeater duplex:	N
Can get repeater duplex:	N
Can set repeater offset:	N
Can get repeater offset:	N
Can set split freq:	N
Can get split freq:	N
Can set split mode:	N
Can get split mode:	N
Can set split vfo:	N
Can get split vfo:	N
Can set tuning step:	N
Can get tuning step:	N
Can set RIT:	N
Can get RIT:	N
Can set XIT:	N
Can get XIT:	N
Can set CTCSS:	N
Can get CTCSS:	N
Can set DCS:	N
Can get DCS:	N
Can set CTCSS squelch:	Y
Can get CTCSS squelch:	Y
Can set DCS squelch:	N
Can get DCS squelch:	N
Can set power stat:	Y
Can get power stat:	Y
Can reset:	N
Can get ant:	N
Can set ant:	N
Can set transceive:	Y
Can get transceive:	N
Can set func:	Y
Can get func:	Y
Can set level:	Y
Can get level:	Y
Can set param:	N
Can get param:	N
Can send DTMF:	N
Can recv DTMF:	N
Can send Morse:	N
Can decode events:	Y
Can set bank:	N
Can set mem:	N
Can get mem:	N
Can set channel:	N
Can get channel:	N
Can ctl mem/vfo:	N
Can scan:	N
Can get info:	Y

Overall backend warnings: 0