Caps dump for model 513
Model name:	AR8600
Mfg name:	AOR
Backend version:	0.5
Backend copyright:	LGPL
Backend status:	Beta
Rig type:	Scanner
PTT type:	None
DCD type:	rig capable
Port type:	RS-232
Serial speed: 4800..19200 bauds, 8N2 XONXOFF
Write delay 0ms, timeout 200ms, 3 retry
Post Write delay 0ms
Has targetable VFO: no
Has transceive: yes
Announce: 0x0
Max RIT: -0.0kHz/+0.0kHz
Max XIT: -0.0kHz/+0.0kHz
Max IF-SHIFT: -0.0kHz/+0.0kHz
Preamp: none
Attenuator: 20dB
CTCSS: none
DCS: none
Get functions: 
Set functions: TSQL ABM AFC 
Get level: ATT(0..0/0) SQL(0..0/0) AGC(0..0/0) RAWSTR(0..0/0) 
Set level: ATT(0..0/0) SQL(0..0/0) AGC(0..0/0) 
Extra levels:
Get parameters: 
Set parameters: 
Extra parameters:
VFO list: MEM VFOA VFOB 
VFO Ops: MCL UP DOWN LEFT RIGHT 
Scan Ops: MEM SLCT PROG VFO 
Number of banks:	20
Memory name desc size:	12
Memories:
	0..999:   	MEM
	  mem caps: BANK FREQ MODE WIDTH TS FUNC LEVEL FLAG NAME 
TX ranges status, region 1:	OK (0)
RX ranges status, region 1:	OK (0)
TX ranges status, region 2:	OK (0)
RX ranges status, region 2:	OK (0)
Tuning steps:
	50 Hz:   	AM CW USB LSB FM WFM 
	100 Hz:   	AM CW USB LSB FM WFM 
	1 kHz:   	AM CW USB LSB FM WFM 
	5 kHz:   	AM CW USB LSB FM WFM 
	9 kHz:   	AM CW USB LSB FM WFM 
	10 kHz:   	AM CW USB LSB FM WFM 
	12.5 kHz:   	AM CW USB LSB FM WFM 
	20 kHz:   	AM CW USB LSB FM WFM 
	25 kHz:   	AM CW USB LSB FM WFM 
	100 kHz:   	AM CW USB LSB FM WFM 
	1 MHz:   	AM CW USB LSB FM WFM 
Tuning steps status:	OK (0)
Filters:
	9 kHz:   	AM 
	3 kHz:   	AM CW USB LSB 
	12 kHz:   	AM FM 
	9 kHz:   	FM 
	230 kHz:   	WFM 
Bandwidths:
	AM	normal: 9 kHz,	narrow: 3 kHz,	wide: 12 kHz
	CW	normal: 3 kHz,	narrow: 0 Hz,	wide: 0 Hz
	USB	normal: 3 kHz,	narrow: 0 Hz,	wide: 0 Hz
	LSB	normal: 3 kHz,	narrow: 0 Hz,	wide: 0 Hz
	FM	normal: 12 kHz,	narrow: 9 kHz,	wide: 0 Hz
	WFM	normal: 230 kHz,	narrow: 0 Hz,	wide: 0 Hz
Has priv data:	Y
Has init:	N
Has cleanup:	N
Has open:	N
Has close:	Y
Can set conf:	N
Can get conf:	N
Can set frequency:	Y
Can get frequency:	Y
Can set mode:	Y
Can get mode:	Y
Can set vfo:	Y
Can get vfo:	Y
Can set ptt:	N
Can get ptt:	N
Can get dcd:	Y
Can set repeater duplex:	N
Can get repeater duplex:	N
Can set repeater offset:	N
Can get repeater offset:	N
Can set split freq:	E
Can get split freq:	E
Can set split mode:	E
Can get split mode:	E
Can set split vfo:	N
Can get split vfo:	N
Can set tuning step:	Y
Can get tuning step:	N
Can set RIT:	N
Can get RIT:	N
Can set XIT:	N
Can get XIT:	N
Can set CTCSS:	N
Can get CTCSS:	N
Can set DCS:	N
Can get DCS:	N
Can set CTCSS squelch:	N
Can get CTCSS squelch:	N
Can set DCS squelch:	N
Can get DCS squelch:	N
Can set power stat:	Y
Can get power stat:	N
Can reset:	N
Can get ant:	N
Can set ant:	N
Can set transceive:	N
Can get transceive:	N
Can set func:	N
Can get func:	N
Can set level:	Y
Can get level:	Y
Can set param:	N
Can get param:	N
Can send DTMF:	N
Can recv DTMF:	N
Can send Morse:	N
Can decode events:	N
Can set bank:	Y
Can set mem:	Y
Can get mem:	Y
Can set channel:	Y
Can get channel:	Y
Can ctl mem/vfo:	Y
Can scan:	Y
Can get info:	Y

Overall backend warnings: 0