Caps dump for model 902
Model name:	R-8A
Mfg name:	Drake
Backend version:	0.5
Backend copyright:	LGPL
Backend status:	Beta
Rig type:	Receiver
PTT type:	None
DCD type:	None
Port type:	RS-232
Serial speed: 9600..9600 bauds, 8N1 CTS/RTS
Write delay 0ms, timeout 200ms, 3 retry
Post Write delay 1ms
Has targetable VFO: no
Has transceive: no
Announce: 0x0
Max RIT: -0.0kHz/+0.0kHz
Max XIT: -0.0kHz/+0.0kHz
Max IF-SHIFT: -0.0kHz/+0.0kHz
Preamp: 10dB
Attenuator: 10dB
CTCSS: none
DCS: none
Get functions: NB MN LOCK 
Set functions: NB MN LOCK 
Get level: PREAMP(0..0/0) ATT(0..0/0) AGC(0..0/0) RAWSTR(0..0/0) STRENGTH(0..0/0) 
Set level: PREAMP(0..0/0) ATT(0..0/0) AGC(0..0/0) 
Extra levels:
Get parameters: TIME(0..0/0) 
Set parameters: TIME(0..0/0) 
Extra parameters:
VFO list: MEM VFO VFOA VFOB 
VFO Ops: CPY FROM_VFO TO_VFO MCL UP DOWN 
Scan Ops: 
Number of banks:	0
Memory name desc size:	7
Memories:
	0..439:   	MEM
	  mem caps: ANT FREQ MODE WIDTH FUNC LEVEL NAME 
TX ranges status, region 1:	OK (0)
RX ranges status, region 1:	OK (0)
TX ranges status, region 2:	OK (0)
RX ranges status, region 2:	OK (0)
Tuning steps:
	10 Hz:   	AM CW USB LSB RTTY FM AMS 
	100 Hz:   	AM CW USB LSB RTTY FM AMS 
	1 kHz:   	AM CW USB LSB RTTY FM AMS 
	10 kHz:   	AM CW USB LSB RTTY FM AMS 
Tuning steps status:	OK (0)
Filters:
	12 kHz:   	FM 
	6 kHz:   	AM AMS 
	4 kHz:   	AM AMS 
	2.3 kHz:   	USB LSB RTTY 
	1.8 kHz:   	USB LSB RTTY 
	4 kHz:   	USB LSB RTTY 
	500 Hz:   	CW 
	1.8 kHz:   	CW 
Bandwidths:
	AM	normal: 6 kHz,	narrow: 4 kHz,	wide: 0 Hz
	CW	normal: 500 Hz,	narrow: 0 Hz,	wide: 1.8 kHz
	USB	normal: 2.3 kHz,	narrow: 1.8 kHz,	wide: 4 kHz
	LSB	normal: 2.3 kHz,	narrow: 1.8 kHz,	wide: 4 kHz
	RTTY	normal: 2.3 kHz,	narrow: 1.8 kHz,	wide: 4 kHz
	FM	normal: 12 kHz,	narrow: 0 Hz,	wide: 0 Hz
	AMS	normal: 6 kHz,	narrow: 4 kHz,	wide: 0 Hz
Has priv data:	N
Has init:	Y
Has cleanup:	Y
Has open:	N
Has close:	N
Can set conf:	N
Can get conf:	N
Can set frequency:	Y
Can get frequency:	Y
Can set mode:	Y
Can get mode:	Y
Can set vfo:	Y
Can get vfo:	Y
Can set ptt:	N
Can get ptt:	N
Can get dcd:	N
Can set repeater duplex:	N
Can get repeater duplex:	N
Can set repeater offset:	N
Can get repeater offset:	N
Can set split freq:	E
Can get split freq:	E
Can set split mode:	E
Can get split mode:	E
Can set split vfo:	N
Can get split vfo:	N
Can set tuning step:	N
Can get tuning step:	N
Can set RIT:	N
Can get RIT:	N
Can set XIT:	N
Can get XIT:	N
Can set CTCSS:	N
Can get CTCSS:	N
Can set DCS:	N
Can get DCS:	N
Can set CTCSS squelch:	N
Can get CTCSS squelch:	N
Can set DCS squelch:	N
Can get DCS squelch:	N
Can set power stat:	Y
Can get power stat:	Y
Can reset:	N
Can get ant:	Y
Can set ant:	Y
Can set transceive:	N
Can get transceive:	N
Can set func:	Y
Can get func:	Y
Can set level:	Y
Can get level:	Y
Can set param:	N
Can get param:	N
Can send DTMF:	N
Can recv DTMF:	N
Can send Morse:	N
Can decode events:	N
Can set bank:	N
Can set mem:	Y
Can get mem:	Y
Can set channel:	Y
Can get channel:	Y
Can ctl mem/vfo:	Y
Can scan:	N
Can get info:	Y

Overall backend warnings: 0