Caps dump for model: 11003
Model name:	RA6790/GM
Mfg name:	Racal
Backend version:	20200113.0
Backend copyright:	LGPL
Backend status:	Untested
Rig type:	Receiver
PTT type:	None
DCD type:	None
Port type:	RS-232
Serial speed: 300..9600 bauds, 7E2 
Write delay: 0mS, timeout 2000mS, 3 retry
Post Write delay: 10mS
Has targetable VFO: N
Has transceive: N
Announce: 0x0
Max RIT: -0.0kHz/+0.0kHz
Max XIT: -0.0kHz/+0.0kHz
Max IF-SHIFT: -8.0kHz/+8.0kHz
Preamp: None
Attenuator: None
CTCSS: None
DCS: None
Get functions: 
Set functions: 
Extra functions:
Get level: RF(0..0/0) IF(0..0/0) AGC(0..0/0) 
Set level: RF(0..0/0) IF(0..0/0) AGC(0..0/0) 
Extra levels:
Get parameters: 
Set parameters: 
Extra parameters:
Mode list: AM CW USB LSB FM AMS 
VFO list: VFOA 
VFO Ops: 
Scan Ops: 
Number of banks:	0
Memory name desc size:	0
Memories: None
TX ranges #1 for TBD:
RX ranges #1 for TBD:
	500000 Hz - 29999999 Hz
		VFO list: VFOA 
		Mode list: AM CW USB LSB FM AMS 
		Antenna list: ANT_NONE
TX ranges #2 for TBD:
RX ranges #2 for TBD:
	500000 Hz - 29999999 Hz
		VFO list: VFOA 
		Mode list: AM CW USB LSB FM AMS 
		Antenna list: ANT_NONE
TX ranges #3 for TBD:
RX ranges #3 for TBD:
TX ranges #4 for TBD:
RX ranges #4 for TBD:
TX ranges #5 for TBD:
RX ranges #5 for TBD:
TX ranges #1 status for TBD:	OK (0)
RX ranges #1 status for TBD:	OK (0)
TX ranges #2 status for TBD:	OK (0)
RX ranges #2 status for TBD:	OK (0)
TX ranges #3 status for TBD:	OK (0)
RX ranges #3 status for TBD:	OK (0)
TX ranges #4 status for TBD:	OK (0)
RX ranges #4 status for TBD:	OK (0)
TX ranges #5 status for TBD:	OK (0)
RX ranges #5 status for TBD:	OK (0)
Tuning steps:
	1 Hz:   	AM CW USB LSB FM AMS 
Tuning steps status:	OK (0)
Filters:
	2.55 kHz:   	USB LSB 
	300 Hz:   	AM CW USB LSB FM AMS 
	1 kHz:   	AM CW USB LSB FM AMS 
	3.2 kHz:   	AM CW USB LSB FM AMS 
	6 kHz:   	AM CW USB LSB FM AMS 
	20 kHz:   	AM CW USB LSB FM AMS 
	ANY:   	AM CW USB LSB FM AMS 
Bandwidths:
	AM	Normal: 300 Hz,	Narrow: 0 Hz,	Wide: 1 kHz
	CW	Normal: 300 Hz,	Narrow: 0 Hz,	Wide: 1 kHz
	USB	Normal: 2.55 kHz,	Narrow: 300 Hz,	Wide: 3.2 kHz
	LSB	Normal: 2.55 kHz,	Narrow: 300 Hz,	Wide: 3.2 kHz
	FM	Normal: 300 Hz,	Narrow: 0 Hz,	Wide: 1 kHz
	AMS	Normal: 300 Hz,	Narrow: 0 Hz,	Wide: 1 kHz
Has priv data:	N
Has Init:	Y
Has Cleanup:	Y
Has Open:	Y
Has Close:	Y
Can set Conf:	Y
Can get Conf:	Y
Can set Frequency:	Y
Can get Frequency:	Y
Can set Mode:	Y
Can get Mode:	Y
Can set VFO:	N
Can get VFO:	N
Can set PTT:	N
Can get PTT:	N
Can get DCD:	N
Can set Repeater Duplex:	N
Can get Repeater Duplex:	N
Can set Repeater Offset:	N
Can get Repeater Offset:	N
Can set Split Freq:	N
Can get Split Freq:	N
Can set Split Mode:	N
Can get Split Mode:	N
Can set Split VFO:	N
Can get Split VFO:	N
Can set Tuning Step:	N
Can get Tuning Step:	N
Can set RIT:	N
Can get RIT:	N
Can set XIT:	N
Can get XIT:	N
Can set CTCSS:	N
Can get CTCSS:	N
Can set DCS:	N
Can get DCS:	N
Can set CTCSS Squelch:	N
Can get CTCSS Squelch:	N
Can set DCS Squelch:	N
Can get DCS Squelch:	N
Can set Power Stat:	N
Can get Power Stat:	N
Can Reset:	Y
Can get Ant:	N
Can set Ant:	N
Can set Transceive:	N
Can get Transceive:	N
Can set Func:	N
Can get Func:	N
Can set Level:	Y
Can get Level:	Y
Can set Param:	N
Can get Param:	N
Can send DTMF:	N
Can recv DTMF:	N
Can send Morse:	N
Can send Voice:	N
Can decode Events:	N
Can set Bank:	N
Can set Mem:	N
Can get Mem:	N
Can set Channel:	N
Can get Channel:	N
Can ctl Mem/VFO:	N
Can Scan:	N
Can get Info:	Y
Can get power2mW:	N
Can get mW2power:	N

Overall backend warnings: 0