Caps dump for model: 25002 Model name: DRT1 Mfg name: SAT-Schneider Backend version: 20200112.0 Backend copyright: LGPL Backend status: Stable Rig type: Tuner PTT type: None DCD type: None Port type: RS-232 Serial speed: 9600..9600 bauds, 8N1 Write delay: 0mS, timeout 200mS, 0 retry Post Write delay: 0mS Has targetable VFO: N Has transceive: N Announce: 0x0 Max RIT: -0.0kHz/+0.0kHz Max XIT: -0.0kHz/+0.0kHz Max IF-SHIFT: -0.0kHz/+0.0kHz Preamp: None Attenuator: None AGC levels: 0=OFF 1=SUPERFAST 2=FAST 3=SLOW 4=USER 5=MEDIUM 6=AUTO CTCSS: None DCS: None Get functions: Set functions: Extra functions: Get level: Set level: Extra levels: Get parameters: Set parameters: Extra parameters: Mode list: AM VFO list: VFOA VFO Ops: Scan Ops: Number of banks: 0 Memory name desc size: 0 Memories: None TX ranges #1 for TBD: RX ranges #1 for TBD: 50000 Hz - 30000000 Hz VFO list: VFOA Mode list: AM Antenna list: ANT_NONE TX ranges #2 for TBD: RX ranges #2 for TBD: 50000 Hz - 30000000 Hz VFO list: VFOA Mode list: AM Antenna list: ANT_NONE TX ranges #3 for TBD: RX ranges #3 for TBD: TX ranges #4 for TBD: RX ranges #4 for TBD: TX ranges #5 for TBD: RX ranges #5 for TBD: TX ranges #1 status for TBD: OK (0) RX ranges #1 status for TBD: OK (0) TX ranges #2 status for TBD: OK (0) RX ranges #2 status for TBD: OK (0) TX ranges #3 status for TBD: OK (0) RX ranges #3 status for TBD: OK (0) TX ranges #4 status for TBD: OK (0) RX ranges #4 status for TBD: OK (0) TX ranges #5 status for TBD: OK (0) RX ranges #5 status for TBD: OK (0) Tuning steps: 1.0 Hz: AM Tuning steps status: OK (0) Filters: 10.0000 kHz: AM Bandwidths: AM Normal: 10.0000 kHz, Narrow: 0.0 Hz, Wide: 0.0 Hz CW Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz USB Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz LSB Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz RTTY Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz FM Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz WFM Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz CWR Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz RTTYR Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz AMS Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz PKTLSB Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz PKTUSB Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz FM-D Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz ECSSUSB Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz ECSSLSB Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz FAX Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz SAM Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz SAL Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz SAH Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz DSB Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz FMN Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz AM-D Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz P25 Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz D-STAR Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz DPMR Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz NXDN-VN Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz NXDN-N Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz DCR Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz AMN Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz PSK Normal: 0.0 Hz, Narrow: 0.0 Hz, Wide: 0.0 Hz Spectrum scopes: None Spectrum modes: Spectrum spans: Spectrum averaging modes: Spectrum attenuator: None Has priv data: N Has Init: Y Has Cleanup: Y Has Open: N Has Close: N Can set Conf: Y Can get Conf: Y Can set Frequency: Y Can get Frequency: N Can set Mode: N Can get Mode: N Can set VFO: N Can get VFO: N Can set PTT: N Can get PTT: N Can get DCD: N Can set Repeater Duplex: N Can get Repeater Duplex: N Can set Repeater Offset: N Can get Repeater Offset: N Can set Split Freq: N Can get Split Freq: N Can set Split Mode: N Can get Split Mode: N Can set Split VFO: N Can get Split VFO: N Can set Tuning Step: N Can get Tuning Step: N Can set RIT: N Can get RIT: N Can set XIT: N Can get XIT: N Can set CTCSS: N Can get CTCSS: N Can set DCS: N Can get DCS: N Can set CTCSS Squelch: N Can get CTCSS Squelch: N Can set DCS Squelch: N Can get DCS Squelch: N Can set Power Stat: N Can get Power Stat: N Can Reset: N Can get Ant: N Can set Ant: N Can set Transceive: N Can get Transceive: N Can set Func: N Can get Func: N Can set Level: N Can get Level: N Can set Param: N Can get Param: N Can send DTMF: N Can recv DTMF: N Can send Morse: N Can send Voice: N Can decode Events: N Can set Bank: N Can set Mem: N Can get Mem: N Can set Channel: N Can get Channel: N Can ctl Mem/VFO: N Can Scan: N Can get Info: N Can get power2mW: N Can get mW2power: N Overall backend warnings: 0